Tuesday, May 18
6:00 - 8:00pm

ES2010 Leadership Meeting

Wednesday, May 19
10:30am to 12:00pm

Advances in Geothermal and Ocean Energy Technologies – ASME Technical Session
Session Chair: Desikan Bharathan, National Renewable Energy Laboratory and Keith Gawlik, National Renewable Energy Laboratory
Papers to be presented include:
Modeling of Ocean Thermal Energy Conversion Plant in Reunion Island
F. Sinama, F. Lucas and F. Garde, Universite de la Reunion - Iut de Terre Sainte
Feasibility of Wind Power for Brackish Groundwater Desalination: A Case Study of the Energy-Water Nexus in Texas
A. Stillwell and M. Webber, The University of Texas at Austin
Towards a Definition and Metric for the Survivability of Ocean Wave Energy Converters
A. Brown, R. Paasch, I. Tumer, A. von Jouanne, T. Brekken, P. Lenee Bluhm and J. Hovland, Oregon State University
A New Oscillating-Foil Power Generator for Sailingship-Based Renewable Energy Generation
M. Platzer, N. Sarigul-Klijn, University of California at Davis

Climate Control and the Environment 1 – ASME Technical Session
Session Chair: Michael Webber, University of Texas at Austin
Papers to be presented include:
The Environmental and Economic Impact of IGCC in China, With Comparison to Alternative Options
Z. Hu and J.Pratt, Shanghai Jiao Tong University
Performance Evaluation of Porous Media Incorporated Kerosene Pressure Stoves
M. Sharma, Indian Institute of Technology and P. Mahanta, IIT Guwahati
Combustion Emissions Modeling and Testing of Conventional Diesel Fuel
H. Liu, S. Strank, M. Werst, R. Hebner, Center for Electromechanics, University of Texas at Austin and J. Osara, Department of Mechanical Engineering
Combustion Emissions Modeling and Testing of Neat Biodiesel Fuels
H. Liu, S. Strank, M. Werst, R. Hebner, Center for Electromechanics, University of Texas at Austin and J. Osara, Department of Mechanical Engineering

CSP Optical Analysis – ASME Technical Session
Session Chairs: Allison Gray, NREL and Bradley R. Stone, Stirling Energy Systems and Ihtesham Chowdhury, Arizona State University
Papers to be presented include:
A Parametric Study of the Impact of Various Error Contributions on the Flux Distribution of a Solar Dish Concentrator
C. Andraka, B. Iverson and J. Yellowhair, Sandia National Laboratories
Finite Element Modeling of Concentrating Solar Collectors for Evaluation of Gravity Loads, Bending, and Optical Characterization
J. Christian and C. Ho, Sandia National Laboratories
Development of a _Solar Patch_ Calculator to Evaluate Heliostat-Field Irradiance as a Boundary Condition in CFD Models
S.S Khalsa and C. Ho, Sandia National Labororatories
Analytical Methods to Evaluate Flux Distributions from Point-Focus Collectors for Solar Furnace and Dish Engine Applications
C. Ho, S. Khalsa, Sandia National Laboratories and N. Siegel, Sandia

Energy Efficiency: Methods and Verification – ASME Technical Session
Session Chair: Hongxi Yin, Purdue University
Papers to be presented include:
A Method to Estimate Real-Time Energy Performance and Carbon Offsets in Residential Buildings
J. Gonzalez, Grove School of Engineering, The City College of New York; S. Vargas, A. Wong and M. Aschheim, Santa Clara University
A TRANSYS Simulation and Experimental Comparison of the Thermal Behavior of a Building Located in Desert Climate
G. Alvarez, J. Xaman, CENIDET; M. Chagolla, CENIDET-DGEST-SEP; M. Jimenez, CIEMAT-PSA, S. Suarez, CIEMAT and M. Heras, CIEMAT-MONCLOA
Evaluation of Measurement and Verification Procedures for Retrofit Savings Using Calibrated Energy Building Models
M. Krarti and N. Kalinic, University of Colorado
Identifying Inefficient Single-Family Homes with Utility Bill Analysis
S. Casey, M. Krarti, University of Colorado; D. Roberts and M. Bianchi, National Renewable Energy Laboratory

Energy from Waste Products – ASME Technical Session
Session Chairs: Byard D. Wood, Utah State University and Makame Mbarawa, Tshwane University of Technology
Papers to be presented include:
Colorado Community Benefits from Installing Waste Heat Recovery System
J. Strehler, Town of Avon Colorado; S. Vandenburgh, D. Parry and T. Rynders, CDM, Inc.
Economics of Wastewater Treatment Codigestion
M. Keleman, InSinkErator
Design of Farm Waste-driven Supply Side Infrastructure for Data Centers
R. Sharma, T. Christian, M. Arlitt, C. Bash and C. Patel, Hewlett Packard Laboratories
Experimental Studies on a DI Diesel Engine Using Tyre Pyrolysis Oil Diethyl Ether Blends
S. Murugan, National Institute of Technology Rourkela and G. Nagarajan, Anna University

Heat Pump, Absorption, and Cooling Systems – ASME Technical Session
Session Chair: John Bryant, Texas A&M University at Qatar
Papers to be presented include:
Regeneration Strategies of Air-purification TSA Process for Cryogenic Air Distillation Plant
P. Zhang, L. Wang, University of Science and Technology Beijing; Y. Cheng, Z. Li, Y. Gao and D. Wang, Baosteel Limited Corporation
The Thermodynamic Analysis and Experimental Investigation on Trans-Critical Carbon Dioxide Heat Pump System
Y. Xie, Y. Liu, Y. Mai and L. Zong, North China Electric Power University
Implementation of Solar Thermal Driven Absorption Cooling in the Southeast
S. Smith, PE, AWARE Environmental, Inc.
Experimental Assessment and Thermal Performance of an Ammonia-Water Absorption Heat Pump
T. Ibrahim, King Saud University
Performance of Add-On, Heat Pump Water Heater (HPWH) Systems and Their Impacts on Electric Utility Loads
Y. Sharaf-Eldeen, E. Gay, Florida Institute of Technology and C. Muccio, ASME Member

Solar Cooling and Combined Systems – ASME Technical Session
Session Chair: Ming Qu, Purdue University and Nelson Fumo, Mississippi State University
Papers to be presented include:
Radiative Cooling in Northern Europe Using a Roof Window
M. Fält and R. Zevenhoven, Åbo Akademi University
Simulation Study for an Absorption Solar Cooling System Operated in Taiwan
R. Yang, National Sun Yat-Sen University, Mechanical and Electro-Mechanical Engineering Department
Solar Thermal Driven Cooling System for a Data Center in Albuquerque New Mexico
N. Fumo, Mississippi State University; V. Bortone, Johnson Controls, Inc. and J. Zambrano, Universidad del Tachira
Design and Analysis of an Integrated Solar Absorption Cooling and Heating System at Purdue University
Y. Hang and M. Qu, Purdue University
Implementation of Solar Thermal Driven Absorption Cooling in the Southeast
S. Smith, PE, AWARE Environmental, Inc.

Sustainable Transportation Energy I – ASME Technical Session
Session Chair: Trevor Demayo, Chevron Energy Technology Co and Todd Otanicar, Loyola Marymount University
Papers to be presented include:
Centralized Transportation Fuel Planning: Leveraging Californian Refineries as Transportation Utilities
E. Grubert, University of Texas at Austin
Sustainable Transportation Fuels from Off-peak Wind Energy, CO₂, and Water
L. Holte, G. Doty, D. McCree, J. Doty and D. Doty, Doty Energy
Toward Efficient Reduction of CO2 to CO for Renewable Fuels
D. Doty, J. Staab, G. Doty and L. Holte, Doty Energy
Integrating Renewable Energy Technologies to Reduce Large Ship Fuel Consumption
B. Gully, C. Seepersad, M. Webber and R. Thompson, University of Texas at Austin

Wednesday, May 19
2:00pm to 3:30pm

Advances in Low Temperature Solar Heating Applications – ASME Technical Session
Session Chair: James Hammonds, Howard University and Luis H. Alva-Solari, Solarsa
Papers to be presented include:
Performance Modeling of an Air-Based Photovoltaic/Thermal (PV/T) Collector
R. Casey, M. Brandemuehl, University of Colorado at Boulder; T. Merrigan and J. Burch, National Renewable Energy Laboratory
Designing of Solar Water Bath Heater for Gas Pressure Reducing Station in Of 150,000 Nm3/H Capacity in Assaluyeh Region in South Iran
F. Dalir and M. Khalaji, Tehran Science and Research Campus
Heat Flow Control and Energy Recovery Using CO₂ in Double Glass Arrangements
R. Zevenhoven and M. Falt, Abo Akademi University
Heat Pipe Augmented Solar Heating System
B. Robinson, M. Sharp, E. Brehob, N. Chmielewski and M. Albanese, University of Louisville
Prediction of Degradation of Polyolefins used in Solar Domestic Hot Water Components
W. Camisa, S. Mantell, J. Davidson and G. Singh, University of Minnesota

Alternative Electric Power Technologies I – ASME Technical Session
Session Chair: Jacek Kalina, Silesian University of Technology
Papers to be presented include:
Human Power Generation in Fitness Facilities
M. Haji, K. Lau and A. Agogino, University of California, Berkeley
Designing, Integrating, and Implementing a Microgrid
C. Boriack and C. Lute, Concurrent Technologies Corporation
Supercritical thermodynamic cycle for power generation from low- and mid- temperature heat sources
H. Chen, D. Goswami, M. Rahman and E. Stefanakos, University of South Florida
Solute Ion Coulomb Force Monopole Motor and Solute Ion Linear Alignment Propulsion
A. Fresco, Member - ASME International
A Roadmap for Rural electrification in Developing Countries using MiViPPs (Micro utility virtual power plants).
S. Pandey, Indian School of Mines Dhanbad and M. Chauhan, BITS Pilani

Climate Control and the Environment 2 – ASME Technical Session
Session Chair: Michael Webber, University of Texas at Austin
Papers to be presented include:
The Feasibility Study of Household Units PV Cells for Carbon Emission Reduction in Developing Countries: A Case Study of North Cyprus
O. Agboola, F. Egelioglu and M. Agboola, Eastern Mediterrean .University
Assessment Indexes and Systems of Environmental Quality of Green Buildings in China
B. Wei, W. Luo and B. Zhang, North China Electric Power University
Deployment Prospects for Proposed Sustainable Energy Alternatives in 2020
D. Doty, G. Doty, D. McCree and J. Doty, Doty Energy

CSP Optical Tools – ASME Technical Session
Session Chairs: Edgar Teufel, German Aerospace Center and Michael Wagner, National Renewable Energy Laboratory
Papers to be presented include:
Methodology to Assess Potential Glare Hazards from Concentrating Solar Power Plants: Analytical Models and Experimental Validation
C. Ho, C. Ghanbari and R. Diver, Sandia National Laboratories
Test Results and Status of the TOP Alignment System for Parabolic Trough Solar Collectors
R. Diver, Sandia National Laboratories and T. Moss, Sandia
Heliostat Alignment Methods: An Overview and Comparison
J. Yellowhair, C. Ho, Sandia National Laboratories
On the Development of a Low Cost Pyrheliometer
M. Gnos, Energy Sustainability Center at Florida State University; B. Greska and A. Krothapalli, Florida State University

Energy Efficiency and Management in Buildings – ASME Technical Session
Session Chair: John Bryant, Texas A&M University at Qatar
Papers to be presented include:
A Practical Integration Approach and Whole Building Energy Simulation of Three Energy Efficient Building Technologies
J. Miller, A. Zhivov, U.S. Army ERDC-CERL; M. Deru, K. Benne, National Renewable Energy Laboratory and D. Herron, U.S. Army ERDC-CERL
Development and Testing of an Automated Building Commissioning Analysis Tool (ABCAT)
J. Bynum, D. Claridge, Texas A&M University and J. Curtin, Wylie Consulting Engineers
Simulation of Indoor Air Flow Fields in a Large Space Building with Stratified Air Conditioning and Perforated Side Wall Diffusers
B. Wei and L. Zhang, North China Electric Power University
Tool for Small Office Buildings Energy Consumption Estimation
N. Fumo and P. Mago, Mississippi State University

Green Energy Infrastucture Case Study – ASME Technical Session
Session Chairs: Hongxi Yin, Purdue University and K. Max Zhang, Cornell University
Papers to be presented include:
IT-Enabled Resource Management
A. Shah, R. Sharma, C. Bash, M. Marwah, T. Christian, C. Patel and K. Corrigan, Hewlett Packard Laboratories
Greening Tenant/Landlord Processes: Demonstrating Transformation In the Industry
C. Carmichael, Rocky Mountain Institute and M. Krarti, University of Colorado
The Co-Design of Water and Energy Efficient Sustainable Housing with the Pinoleville Pomo Nation
T. Schultz, R. Shelby and A. Agogino, University of California, Berkeley
On the Environmental Sustainability of Solar Technologies in a Coastal City
B. Lebassi, Santa Clara University; J. Gonzalez, Grove School of Engineering, The City College of New York and B. Bornstein, San Jose State University
Application and Development of Renewable Energy: A Case Study of Solar Energy Utilization in Baoding, China
X. Zhang, Y. Gao and G. Shi, North China Electric Power University

Low/Zero Emission Power Plants & Carbon Sequestration 1 – ASME Technical Session
Session Chair: Flavio Franco, Alstom
Papers to be presented include:
Technical and Economic Analysis of a Waste-To-Energy Plant for Austin, Texas under a Range of Greenhouse Gas Emissions Prices
A. Townsend and M. Webber, The University of Texas at Austin
Using Solar Thermal Energy for Solvent Regeneration in Post-Combustion CO2 Capture
S. Cohen, M. Webber and G. Rochelle The University of Texas at Austin
Opportunities for CO₂ Capture and Storage in Iranian Electricity Generation
F. Zabihian and A. Fung, Ryerson University
Analysis of Flexible CO₂ Capture over an Investment Life Using a Dynamic Electric Grid Model
J. Fyffe, S. Cohen, M. Webber and G. Rochelle, The University of Texas at Austin

Sustainable Transportation Energy II – ASME Technical Session
Session Chairs: Todd Otanicar, Loyola Marymount University and Patrick Phelan, Arizona State University
Papers to be presented include:
Simulation by Means Computational Fluids Dynamics of the Mixing Process Air-Natural Gas in a Turbocharger Diesel Engine.
F. Bermejo Altamar and L. Corredor Martinez, Universidad del Norte
A Compact External Combustion Engine With High Part-Load Efficiency
R. Bourque, Bourque Engineering LLC
Experimental Study on Waste Heat Recovery from an IC Engine Using Thermoelectric Technology
R. Kumar

Wednesday, May 19, 2010
4:00pm to 5:30pm

CSP Components – ASME Technical Session
Session Chair: Nathan Siegel, Sandia
Papers to be presented include:
Effect of Camera-like Aperture in Quest for Maintaining Quasi-Constant Radiation Inside a Solar Reactor
N. Ozalp, A. Toyama, A. Kanjirakat and R. Rowshan, Texas A&M University at Qatar
An Air-Based Cavity-Receiver for Solar Trough Concentrators
R. Bader, ETH Zurich; M. Barbato, SUPSI; A. Pedretti, Airlight Energy Holding SA and A. Steinfeld, ETH Zurich
Preliminary Analysis Of A 100 kWth Mini-Tower Solar Field With An Integrated Optical Waveguide Receiver For Solar Chemistry
A. Gonzalez, J. Gonzalez-Aguilar and M. Romero Alvarez, IMDEA Energy
Thermodynamic Cycles for Small Particle Heat Exchange Receivers used in Concentrating Solar Power Plants
K. Kitzmiller and F. Miller, San Diego State University
Thermal Modelling and Simulation of Parabolic Trough Absorber Tubes
M. Eck, German Aerospace Center; J. Feldhoff and R. Uhlig, DLR

Economic, Environmental and Efficiency Evaluations of Systems – ASME Technical Session
Session Chair: Laura A. Schaefer, University of Pittsburg
Papers to be presented include:
Design for Sustainable Data Center Energy Use and Eco-Footprint
M. Meckler, Design Build Systems
Evaluation of Environmental Loads for the Synthesis of a Trigeneration System
L. Serra, M. Lozano and M. Carvalho, Aragon Institute of Engineering Research (I3A) - Universidad de Zaragoza
Revamping, energy efficiency and exergy analysis of an existing upstream gas treatment facility
G. Valenti, Politecnico di Milano; M. Margarone, S. Magi, Eni Exploration and Production; G. Gorla, S. Biffi, P. Siboni, Tecnomare; M. Romano, A. Giuffrida, E. Negri and E. Macchi,Politecnico di Milano
Economic optimization of Shell and tube Heat exchanger based on constructal theory
M. Amidpour and A. Vahdat Azad, K.N. Toosi University of Technology
Economic Evaluation of Residential Central Air Conditioning Systems
B. Wei, H. Yang and W. Luo, North China Electric Power University

Energy Storage – ASME Technical Session
Session Chairs: Rathinam Selvam, University of Arkansas and Debjyoti Banerjee, Texas A&M University
Papers to be presented include:
Projections of Levelized Cost Benefit of Grid-Scale Energy Storage Options
D. Doty, D. McCree and G. Doty, Doty Energy
Leveling Intermittent Renewable Energy Production Through Biomass Gasification-Based Hybrid Systems
J. Dean, R. Braun, Colorado School of Mines; M. Penev, C. Kinchin, National Renewable Energy Laboratory and D. Munoz, Colorado School of Mines
Electric Utility Operational Cost and Emissions Management with Grid-scale Energy Storage
C. Harris, M. Webber and J. Meyers, The University of Texas at Austin

Innovative Simulation and Analysis Method – ASME Technical Session
Session Chairs: Ming Qu, Purdue University and K. Max Zhang, Cornell University
Papers to be presented include:
Energyplus Simulation Speedup Using Data Parallelization Concept
V. Garg, K. Chandrasen, S. Tetali, IIIT Hyderabad and J. Mathur, Malaviya National Institute of Technology Jaipur
Towards a Net Zero Building Cluster Energy Systems Analysis for a Brigade Combat Team Complex
A. Zhivov, F. Holcomb, R. Liesen, U.S. Army Engineer Research & Development Center; S. Richter, GEF Ingenieur AG and R. Jank, Volkswohnung GmbH
Instrumentation and Simulation of the Hygro-thermal Conditions of a Green Building : A Study of the Impact Post-Occupancy Usages on Thermal Comfort
F. LUCAS, J. Perouzel, F. SINAMA, Universite de la Reunion - Iut Saint Pierre and F. Garde, Garde
The Analysis and Application of Energy-internet in the Low-carbon Community
H. Liang, W. long, Y. Song and F. Liu, Tongji University
Development of an Hourly Optimization Tool for Renewable Energy Systems
C. Lee, M. Krarti, University of Colorado and A. Walker, NREL

Low/Zero Emission Power Plants & Carbon Sequestration 2 – ASME Technical Session
Session Chair: Flavio Franco, Alstom
Papers to be presented include:
Thermo-economic analysis of microalgae co-firing process for fossil fuel-fired power plants
J. Ma, O. Hemmers, Harry Reid Center for Environmental Studies, University of Nevada, Las Vegs
An Advanced Power-Generation System with CO2 Recovery Integrating Dimethyl Ether (DME) Fueled Chemical-Looping Combustion
T. Han, H. Hong, H. Jin, Institute of Engineering Thermophysics and C. Zhang, Graduate University of Chinese Academy of Sciences
Practical Considerations for Low Emission Thermal Power Plants
D. Galpin and T. Galpin, Shaw Power Group

Nanotechnology Applications I – ASME Technical Session
Session Chair: Anthonio Bula, Unversidad del Norte
Papers to be presented include:
Tuning the Extinction Coefficient for Direct Absorption Solar Thermal Collector Optimization
T. Otanicar, Loyola Marymount University; P. Phelan, R. Taylor, Arizona State University and H. Tyagi, Indian Institute of Technology - Ropar
Waste Heat Use through Microfabrication and Micro System Development
L. Weiss, H. Hemphill, S. MAHARJAN and J. Fang, Louisiana Tech University
Applicability of Nanofluids in Concentrated Solar Energy Harvesting
R. Taylor, P. Phelan, Arizona State University; T. Otanicar, Loyola Marymount University and S. Trimble, Arizona State University
System Analysis of MPCM Slurry enhanced with Carbon Nanotubes as Heat Transfer Fluid
H. Taherian and J. Alvarado, Texas A&M University
Enhanced Thermal Properties of PCM Based Nanofluid For Solar Thermal Energy Storage
D. Shin and D. Banerjee, Texas A&M University

Solar Heating Applications – ASME Technical Session
Session Chairs: Jorge E. Gonzales Grove School of Engineering, The City College of New York, David Archer, Carnegie Mellon University
Papers to be presented include:
Conceptual and Basic Design of a Stirling Engine Prototype for Electrical Power Generation by Solar Means
C. Roldan, P. Pieretti and L. Rojas-Solorzano, Universidad Simon Bolivar
Solar Furnace Heliostat Closed-Loop Alignment Control System
K. Glenn, New Mexico State University
Exposure of Polymeric Glazing Materials on NREL's Ultra-Accelerated Weathering System
C. Bingham, G. Jorgensen, NREL and A. Wylie, Bayer Materials Science
Performance Analysis and Parametric Optimization of a Class Solar-driven Heat Engines
H. Zhang, L. Wu, and G. Lin, Xiamen University

Sustainable Transportation Energy III – ASME Technical Session
Session Chairs: Patrick Phelan, Arizona State University and Trevor Demayo, Chevron Energy Technology
Papers to be presented include:
Reducing Energy Consumption of Ground Vehicles by Active Flow Control
M. Bellman, R. Agarwal, J. Naber and L. Chusak, Washington University in St. Louis
Impact of Different Charging Strategies of Electric Vehicles on the German Grid
N. Hartmann and D. Uzdemir, Institute of Energy Economics and the Rational Use of Energy, University of Stuttgart
Design and Assembly of an Extended Range Electric Vehicle as a University Capstone Project
V. Sabatini, R. Maxson, W. Haupfear, D. White, J. Mckisson and S. Carter, Embry-Riddle Aeronautical University

Thursday, May 20, 2010
8:30am to 10:00am

Sustainability and the Built Environment - ASME General Session
There is a concerted effort by urban planners, architects and engineers to make cities more sustainable. These efforts include a range of strategies such as the development of highly energy efficient buildings, deployment of distributed renewable energy resources, and increase of vegetative cover. Such strategies are often in direct competition (e.g., covering roofs with photovoltaic panels vs. a highly reflective membrane or a vegetated roof). In many cases these sustainability strategies result in complex interactions and unintended consequences for the urban environment. This session provides an overview of the urban climate system and a discussion of the underlying causes of the urban heat island. It will discuss various approaches to enhancing sustainability in the built environment including design and analysis tools suitable for both architects and engineers.
Speakers Include:
Energy Sustainability in the Built Environment
David Sailor, Professor of Mechanical Engineering, Portland State University
Analysis Tools and Case Studies for Sustainability Buildings
Craig Christensen, Research Scientist, National Renewable Energy Laboratory

10:30am to 12:00pm

Advances in Photovoltaics 2 – ASME Technical Session
Session Chair: Ziqi Liang,  National Renewable Energy Laboratory
Papers to be presented include:
Distributed Industrial Scale Hybrid Solar Concentrator Photovoltaics and Thermal Energy
D. Borton, Solar Age Technologies, Inc
Numerical Modeling of Turbulent Natural Convection in A Concentrating Photovoltaic System
K. Ahsan, R. Boehm, Y. Chen and J. Nie, University of Nevada Las Vegas
Electrodeposition and Characterization of Very Thin Film II-VI Compounds For Novel Superlattice Solar Cells
S. Jain and P. Singh, Villanova University
Analysis of the Potential for Mitigation of Building-Integrated PV Arrays Shading Losses Through Use of Distributed Power Converters
S. MacAlpine, M. Brandemuehl and R. Erickson, University of Colorado at Boulder

Detailed Component Evaluation – ASME Technical Session
Session Chair: Joerg Petrasch, University of Florida
Papers to be presented include:
Numerical Simulation on the Heat Source Surface of Spray Combustion for the Fuel of Li/SF6
J. Yang, Z. zhang and H. Zheng, Harbin Engineering University
Flare Gas Utilization at Combined Oil-Gas Well Sites
C. Quinn, D. Zimmerle and D. Olsen, Colorado State University
CFD Simulation of the Supersonic Steam Ejector
L. Zhiming, W. Jinli, H. Zheng, C. lin and Y. li, Harbin Engineering University
The Structure Design and Numerical Simulation of Dual-Fuel Gas Turbine nozzle
H. yang, H. Zheng, Z. li and Y. li, Harbin Engineering University
Heat Balancing Characteristics of a Domestic Pressure Cooker
P. Ravikumar, Jayaram engneering college and P. sivamurugan, Sri Vighnesh Polytechnic College

Hybrid Plants and Combined Cycles – ASME Technical Session
Session Chair: Alexandre K. da Silva, The University of Texas at Austin and Vittorio Verda, Politecnico di Torino - DENER
Papers to be presented include:
A Survey of Optimal Placement and Coordinated Control Techniques of FACTS Controllers in Multi-Machine Power System Environments
B. singh, KNIT, Sultanpur, INDIA
Solid Oxide Fuel Cell: Gas Turbine Hybrid Power Plants for Cost Effective Power Generation in the Caribbean
D. Cheddie and R. Murray, University of Trinidad and Tobago
Cogeneration System Modeling Based On Empirical Results
F. Betz, Affiliated Engineers, Inc.; F. Marion and D. Archer, Carnegie Mellon University
Validation of a Simulation Model for a Combined Otto and Stirling Cycle Power Plant
J. McGovern, B. Cullen, Dublin Institute of Technology, M. Feidt, Universite Henri Poincare of Nancy 1 and S. Petrescu, University Politehnica of Bucharest

Renewable Energy Studies – ASME Technical Session
Session Chair: Mohammad Hamdan, United Arab Emirates University
Papers to be presented include:
Lessons Learned from 30 Years of Experience with Renewable Energy Technologies at Fort Huachuca, Arizona
B. Stein, R. Ducey, U.S. Army Construction Engineering Research Laboratory and B. Johnson, U.S. Army Ninth Signal Command
Reflections on the Motive Power of Fire II
G. Mahl, III, Mahl and Associates, Inc.
Western Wind and Solar Integration Study Hydropower Analysis: Benefits of Hydropower from Large-Scale Integration of Renewables in the Western United States
C. Pete, T. Acker, Northern Arizona University; G. Jordan, General Electric Company and D. Harpman, U.S. Bureau of Reclamation
Low Capital Cost Renewable Energy Conversion with Liquid Piston Stirling Engines
J. Stevens, UCCS MAE

Solar Thermal Storage 1 – ASME Technical Session
Session Chair: Doerte Laing, German Aerospace Center (DLR) and Russel Muren, Abengoa Solar Inc.
Papers to be presented include:
3D FEM Model to Improve the Heat Transfer in Concrete for Thermal Energy Storage in Solar Power Generation
R. Selvam and M. Castro, University of Arkansas
Effect of High Temperatures and Heating Rates on High Strength Concrete for Use as Thermal Energy Storage
E. John, W. Hale and R. Selvam, University of Arkansas
Liquid Calcium Chloride Solar Storage: Concept and Analysis J. Quinnell, J. Davidson, University of Minnesota and J. Burch, National Renewable Energy Laboratory
Research Development and Application of Solar Thermal Storage with Phase Change Materials
F. Liu, Y. Hang, H. Liang and X. Tang, Tongji University

Solar Thermochemical Cycles – ASME Technical Session
Session Chair: Peter Loutzenhiser, ETH Zurich
Papers to be presented include:
Modeling Solar Thermochemical Splitting of CO2 Using Metal Oxide and CR5
K. Chen and R. Hogan, Sandia National Laboratories
O₂-releasing reactivity of ceria-based reactive ceramics on irradiation of concentrated solar beam for solar hydrogen production
M. Tada, T. Ishihara, H. Kaneko and Y. Tamaura, Tokyo Institute of Technology
Testing of a CR5 Solar Thermochemical Heat Engine Prototype
R. Diver, J. Miller, Sandia National Laboratories; N. Siegel and T. Moss, Sandia
Cerium Oxide Materials for the Solar Thermochemical Decomposition of Carbon Dioxide
N. Siegel, Sandia; S. Livers, J. Miller and R. Diver, Sandia National Laboratories

Sustainability Case Studies – ASME Technical Session
Session Chairs:T. Agami Reddy, Arizona State University and Adnan AL Anzi, Kuwait University
Papers to be presented include:
An Adobe Building Integrated with Skylight and PV Powered Earth Air Heat Exchanger
A. Chel and G. Tiwari, Centre For Energy Studies, IIT Delhi
Thermal Performance of a Natural Ventilation System
M. JimΘnez, J. GuzmЯn, CIEMAT-PSA; M. Heras, CIEMAT-MONCLOA; J. Arce, J. XamЯn and G. Alvarez, CENIDET
Energy Saving Opportunities Using Building Energy Simulation for a typical Mosque in Kuwait
A. AL Anzi, Kuwait University
Using Core Sunlighting to Improve Illumination Quality and Increase Energy Efficiency of Commercial Buildings
L. Whitehead, A. Upward, P. Friedel, G. Cox and M. Mossman, University of British Columbia
Thermal Analysis of a Building’s Roof with Cone Frustum Holes Containing PCM
E. Alawadhi, Kuwait University

U.S. Renewable Policy Analysis – ASME Technical Session
Session Chair: Carey King, University of Texas at Austin
Papers to be presented include:
Water Impacts of the American Clean Energy and Security Act Renewable Portfolio Standard on Texas
E. Grubert and M. Webber, The University of Texas at Austin
Integrative Analysis of Non-Renewable and Renewable Energy Sources for Electricity Generation in U.S: Demand and Supply Factors, Environmental Risks and Policy Evaluation
R. Agarwal, P. Wang and L. Chusak, Washington University in St. Louis
Policy Solutions for Increasing Economic Impacts of Wind Development in Arizona
K. Wadsack and T. Acker, Northern Arizona University
State of the States 2010
J. McLaren, National Renewable Energy Laboratory
Evaluating the Cost of Food in a Carbon Constrained Economy
K. Twomey and M. Webber, University of Texas at Austin

Thursday, May 20, 2010
12:15pm to 1:45pm

ASME Technical Committee Meetings:
- Conservation and Solar Buildings
- Fundamentals and Theory
- Heating and Cooling Applications
- Photovoltaics
- Solar Chemistry and Bioconversion
- Solar Thermal Power
- Testing and Measurement
- Wind Energy

Thursday, May 20, 2010
2:00pm to 3:30pm

Advances in Photovoltaics 3 – ASME Technical Session
Session Chair: Ortega Alfonso, University of Villanova
Papers to be presented include:
Configuration Optimization of a Photovoltaic Power Plant in Relation to Cost and Performance
J. Moore and K. Lee, WorleyParsons
Exergy Analysis of PV-Water Cooling System and PV-SAHP System
B. Wei and F. Ma, North China Electric Power University
Seed-induced Crystallization of Amorphous Silicon for the Formation of Large-grain Poly-crystalline Silicon
J. Trask, L. Cui, A. Wagner, A. Mkhoyan and U. Kortshagen, University of Minnesota
Silicon and Germanium Nanocrystal Inks for Low-cost Solar Cells
X. Pi, Z. Holman and U. Kortshagen, University of Minnesota

CHP and CCHP Systems– ASME Technical Session
Session Chairs: Lianne Lami, Bocci Engineering and Vittorio Verda, Politecnico di Torino - DENER
Papers to be presented include:
Radial Inflow Turbine Assessment for Small-Scale Concentrated Solar Rankine Thermal Combined Heat and Power Technology
D. Sunter, University of California; V. Carey and Z. Norwood, University of California at Berkeley
Strategies for Performance Enhancement of Tesla Turbines for Combined Heat and Power Applications
V. Romanin, V. Carey and Z. Norwood, University of California at BerkeleyNorwood, University of California at Berkeley
Performance-Cost Analysis of Solar Combined Heat and Power Systems
Z. Norwood, S. Pepe, V. Romanin and D. Kammen, University of California at Berkeley
A System-Level Simulation Model of Poly-generation Plant Based on Gasification Technology with Methanol and Power Generation
P. Chen, H. Chiu, Y. Chyou, Institute of Nuclear Energy Research, Atomic Energy Council and C. Yu, Graduate Institute of Energy Engineering, National Central UniversityYu, Graduate Institute of Energy Engineering, National Central University
Heat Recovery from a Microturbine System
C. Bailey and J. Wallace, University of TorontoWallace, University of Toronto

Foreign Perspectives of Energy and Policy – ASME Technical Session
Session Chair: K. Max Zhang, Cornell University
Papers to be presented include:
Energy Efficiency in Industrial Operations: An Evaluation of Benefits and Costs of the Most Effective Interventions within the Italian Industrial Sector
A. Trianni and E. Cagno, Politecnico di Milano
Energy Conservation Building Code in India: Status, Issues and Opportunities
J. Mathur, Malaviya National Institute of Technology Jaipur; V. Garg, International Institute of Information Technology and V. Jangra, Bureau of Energy Efficiency
Research on Assessment Method of Green Buildings in China
B. Wei, B. Zhang and W. Luo, North China Electric Power University
Learnable Lessons on Sustainability from the Provision of Electricity in South Africa
M. Heun, Calvin College; W. van Niekerk, M. Swilling, A. Meyer, A. Brent and T. Fluri, Stellenbosch University

Low/Zero Energy Buildings (1) – ASME Technical Session
Session Chair: Lin Duanmu, Dalian University of Technology
Papers to be presented include:
Characterizing the Response of Commercial and Industrial Facilities to Dynamic Pricing Signals from the Utility
J. Mathieu, D. Callaway, University of California, Berkeley; A. Gadgil, P. Price and S. Kiliccote, Lawrence Berkeley National Laboratory
Passive House Design Guidelines for Residential Buildings in El Salvador
L. Martinez, Universidad Centroamericana J.S. Canas
Achieving Climate-Positive, Energy-Positive Homes: 60 years of Northeast Climate Housing
D. Borton, Solar Age Technologies, Inc; C. McDaniel, Oberlin Colege and H. Stoner, Hudson Valley Community College
Study on Heat Performance of PCM Heat Storage Device in the Solar Water Heating System
L. Duanmu, X. Li, H. Shu, Y. Zhang and S. Li, Dalian University of Technology
Towards Optimizing Building Energy Use to Reduce Electric System Carbon Emissions
E. Greensfelder, G. Henze, University of Colorado and V. Cushing, Clean Urban Energy, Inc.

Solar Thermal Storage 2 – ASME Technical Session
Session Chairs: Brian Luptowski, Abengoa Solar Inc. and Brian Luptowski, Abengoa Solar Inc.
Papers to be presented include:
Freeze-Thaw Tests of Trough Receivers Employing a Molten Salt Working Fluid
G. Kolb, C. Ho, B. Iverson, Sandia National Laboratories; T. Moss and N. Siegel, Sandia
Heat Transfer in Thermocline Storage System with Filler Materials: Analytical Model
W. Karaki, J. Van Lew, P. Li, C. Chan, University of Arizona and J. Stephen, US Solar
Enhanced Sensible Heat Capacity of Molten Salt Based Nanofluid For Solar Thermal Energy Storage Application
H. Kwak, D. Shin and D. Banerjee, Texas A&M University
Study of High Temperature Nanofluids using Carbon Nanotubes (CNT) for Solar Thermal Storage Applications
B. Jo and D. Banerjee, Texas A&M University
Yearly Performance Modeling of Concrete and Phase Change Material Thermal Energy Storage Systems For Concentrated Solar Power Plants
R. Muren, D. Chapman and D. Arias, Abengoa Solar Inc.

Solar Thermochemical Processes – ASME Technical Session
Session Chair: Ken S Chen, Sandia National Laboratories
Papers to be presented include:
Molten-Salt Tubular Absorber/Reformer (MOSTAR) Project: Reforming Performance of Reactor Tubes During Intermittent heating
N. Gokon, T. Kodama, S. Yamashita, S. Mori, Niigata University and T. Seo, Inha University
Solar Syngas Production from H2O and CO2 via Two Step Thermochemical Cycles Based on FeO/ Fe3O4 Redox Reactions: Kinetic Analysis
A. Stamatiou, P. Loutzenhiser and A. Steinfeld, ETH Zurich
Splitting Water and Carbon Dioxide via the Heterogeneous Oxidation of Zinc Vapor: Thermodynamic Considerations
L. Venstrom and J. Davidson, University of Minnesota - Twin CitiesDavidson, University of Minnesota - Twin Cities
Effect of Abrupt Increase in Temperature on Electric Properties of Ce2-xZrxO2 Reactive Ceramics for Two-Step Water Splitting Reaction
C. Lee, H. Kaneko, Y. Tamaura, Tokyo Institute of Technology

Sustainability Metrics – ASME Technical Session
Session Chair: Susan Stewart, Penn State University
Papers to be presented include:
Resource Accounting and Waste Impact: Limitations of Exergy as a Sustainability Tool
K. Gaudreau, Environment and Resource Studies; R. Fraser, Mechanical and Mechatronics Engineering and S. Murphy, Environment and Resource Studies
Extending Lifecycle Exergy Analysis Beyond Resource Consumption
A. Shah and K. Corrigan, Hewlett Packard Laboratories
Exergy Sustainability: An Energy Surety Approach
R. Robinett III and D. Wilson, Sandia National Laboratories
Second-law Analysis in a Steam Power Plant for Minimization of Avoidable Exergy Destruction
T. Ray, and P. Ekbote, NTPC Ltd. and R. Ganguly, and A. Gupta, Jadavpur University

Turbines and Engines
Session Chair: Brent Bartlett, Turbo Solutions Engineering LLC
Papers to be presented include:
Assessment of a Syngas-Diesel Dual Fuelled Compression Ignition Engine
M. Sahoo, D. Sahoo and U. Saha, Indian Institute of Technology Guwahati
Performance and Testing of a Unique Low Speed Water Turbine
G. Bredariol, K. stevens, A. Garnier and A. Foley, U.S Coast Guard Academy
The Design of a Low Speed Water Turbine
A. Foley, U.S Coast Guard Academy

Thursday, May 20, 2010
4:00pm to 5:30pm

Alternative Electric Power Technologies II – ASME Technical Session
Session Chair: Daniel Zimmerle, Colorado State University
Papers to be presented include:
Dynamic Simulation of an Integrated Solar Power Plant
P. Shahmaleki and M. Mahzoon, Shiraz University
Pre-Feasibility Analysis of a Wind-Solar-Diesel Electricity Generation System for a Remote Island Community in the Gulf of Guayaquil in Ecuador
P. Tagle and J. Duque, Escuela Superior PolitΘcnica del Litoral
A Scalable, Economical, Uninterrupted Solar Thermal Power System
B. Bartlett, N. D'Orsi, C. Hobson, Turbo Solutions Engineering LLC; B. McGeoch, E. Whitaker, Thermal Storage Solutions, LLC and D. Torrey, Advanced Energy Conversion, LLC
Integrated Biomass Gasification Small-Scale Combined Cycle Distributed Generation Plant with Microturbine and ORC
J. Kalina, Silesian University of Technology
Analytical Thermal Analysis of Solar Chimney Power Plant
M. Hamdan, United Arab Emirates University

Analyses of Solar Cooling Technologies – ASME Technical Session
Session Chairs: Jane H. Davidson, University of Minnesota - Twin Cities and Ma. Dolores Duran,
Papers to be presented include:
Cumulative Frequency Distributions for Hourly Clearness Indices Through Generalized Parameters
S. Varanasi, Indian Institute of Technology and P. Ravikumar, Jayaram engneering college,
Cost and Performance Analysis of a Solar Thermal Cooling Project
J. Dickinson, R. Hess, Salt River Project, H. van Lambalgen, Quest Energy Group, J. Seaton, Arizona Army National Guard and A. Burnham, Arizona State University
An Improved Methodology for Reporting Solar Radiation Data
D. Wogan, M. Webber and A. da Silva, The University of Texas at Austin
Solar Chiller Absorption Optimization by Using Genetic Algorithms
A. Abbasi Godarzi, J. Samimi, M. Jalilian and M. Vesaghi, Sharif University of Technology

Biofuels Production – ASME Technical Session
Session Chair: Marco Sanjuan, Universidad del Norte
Papers to be presented include:
Catalytic Hydrothermal Conversion of Glucose to Light Petroleum Alkanes
S. Yin, Y. Pan and C. Tan, University of Calgary
Production of Biofuels Using Micro-Algae Aquaculture
A. Saleh, Trow International Ltd / Harvard University and R. Sanchez, Harvard University, School of Public Health
Effect of Solids Removal from Dairy Manure Feedstock on Biogas Production in Anaerobic Digesters
P. Zemke, B. Wood and C. Rohleder, Utah State University
Design and Performance of a Photobioreactor Utilizing Spatial Light Dilution
D. Dye, J. Muhs, B. Wood and R. Sims, Utah State University

Evaluation and Modeling of Solar Thermochemical Cycles and Processes – ASME Technical Session
Session Chair: Nathan Siegel, Sandia
Papers to be presented include:
Numerical Study on the Thermal Interaction of Gas-particle Transport for a Vortex Flow Solar Reactor
J. Devanuri and N. Ozalp, Texas A&M University at Qatar
A CFD Study on the Effect of Carbon Particle Seeding for the Improvement of Solar Reactor Performance
A. Kanjirakat and N. Ozalp, Texas A&M University at Qatar
Renewable Hydrogen from the Zn/ZnO Solar Thermochemical Cycle: A Cost and Policy Analysis
J. Haltiwanger, J. Davidson, E. Wilson, University of Minnesota
A Free and Open Source Monte Carlo Ray-Tracing Program for Concentrating Solar Energy Research
J. Petrasch, University of Florida

Exergy Analysis for System Improvement and Device Optimization – ASME Technical Session
Session Chair: Susan Stuwart, Penn State University,
Papers to be presented include:
Daily Exergy Assesment of LiBr-Water Absorption Chiller Used for Solar Cooling
C. Onan and D. Uzkan, Yildiz Technical University
Exergetic Analysis of Hybrid Energy Conversion and Storage Scenarios for Use of Solar Power in Stationary Applications
N. Hotz, H. Pan, C. Grigoropoulos, UC Berkeley and S. Ko, KAIST
Energy and Exergy Assessments of a Trigeneration System Based on Organic Rankine Cycle and Biomass Combustor
F. Al-Sulaiman, Carleton University; F. Hamdullahpur, Waterloo University and I. Dincer, Faculty of Engineering and Applied Science, University of Ontario Institute of Technology

Fuel Cell Systems Modeling, Design, and Optimization 1 – ASME Technical Session
Session Chair: Ali Jalalzadeh-Azar, National Renewable Energy Laboratory
Papers to be presented include:
Exergetic Analysis of a Solar-Heated Fuel Cell System Fed By Methanol
N. Hotz, M. Lee, C. Grigoropoulos, UC Berkeley; R. Zimmerman, G. Rosengarten, University of New South Wales and D. Poulikakos, ETH Zurich
Performance of Biogas Fueled Hybrid Solid Oxide Fuel Cell (SOFC) and Gas Turbine Cycle
F. Zabihian, A. Fung, Ryerson University and M. Koksal, Hacettepe University
Optimal Design of a Biogas Fuelled MCFC System Integrated with an Anaerobic Digester
V. Verda and F. Nicolin, Politecnico di Torino - DENER
Fabrication/Characterization of Micro PEM Fuel Cells using Pyrolysis
Y. Wang, UC Irvine; L. Pham and G. Vasconcellos, UCI
Analysis of Polymer Electrolyte Fuel Cell Cold-Start
Y. Wang, J Mishler, University of California Irvine

Low/Zero Energy Buildings (2) – ASME Technical Session
Session Chair: Xiang Liu, Nexant Inc.
Papers to be presented include:
Main Street Zero Energy Buildings _ the Zero Energy Method in Concept and Practice
S. Pless, P. Torcellini, National Renewable Energy Laboratory; D. Okada, Stantec; T. Hootman, RNL and C. Lobato, National Renewable Laboratory
Experimental Evaluation of a Bio-based Phase Change Material to Improve Building Energy Performance
K. Muruganantham, P. Phelan, Arizona State University; T. Mcdonald, Arizona Public Service; D. Ludlam and P. Horwath, Phase Change Energy Solutions Inc
Evaluation of Ground Source Heat Pump Energy, Demand, and Greenhouse Gas Emissions Reduction Potential in Colorado Residential Buildings
M. Krarti and D. Studer, University of Colorado
Reducing Energy Demand in Commercial Buildings: Balancing Convection and Radiant Cooling
L. Chusak, A. Harris and R. Agarwal, Washington University in St. Louis

Wind Resource Assessment and Forecasting – ASME Technical Session
Session Chair: Robi Robichaud, National Renewable Energy Laboratory
Papers to be presented include:
Design of an Extra-Tall Wind Resource Assessment for the Complex Terrain of the Appalachian Ohio Foothills
C. Womeldorf, Ohio University
Simulating the Dynamic and Steady-State Response of a Rotor Resistive Controlled 1.5 MW Variable Speed Wind Turbine
J. Garrison and M. Webber, The University of Texas at Austin
Comparison of Different Time Series Methods for Short-Term Forecasting of Wind Energy Production
G. Li and J. shi, North Dakota State University
A Methodology for Comprehensive Characterization of Errors in Wind Power Forecasting
M. Bielecki, J. Kemper and T. Acker, Northern Arizona University
Modeling of Wind Power Production Forecast Errors for Wind Integration Studies
J. Kemper, M. Bielecki and T. Acker, Northern Arizona University

Thursday, May 20, 2010
Evening

6:00pm to 8:00pm
ASME Technical Committee Chairs Meeting

8:00pm to 10:00pm
ASME Solar Energy Division Executive Committee Meeting

Friday, May 21, 2010
10:30am to 12:00pm

Biofuels Analysis – ASME Technical Session
Session Chair: Chao Tan, University of Calgary
Papers to be presented include:
Effect of Multiple Injection Strategy on Atomization and Emission Reduction Characteristics in a Diesel-Ethanol Fueled Engine
S. Park, I. Youn and C. Lee, Hanyang University
A Resource-Limited Approach To Estimating Algal Biomass Production With Geographical Fidelity
D. Wogan, M. Webber and A. da Silva, The University of Texas at Austin
Experimentally Derived Arrhenius Coefficients for Fast Pyrolysis of Biomass
A. Williams and J. Mayor, Georgia Institute of Technology
Development of Work Force for Wind Energy
K. Mehta, A. Swift, R. Walker, K.L. Seger, Texas Tech University

Consumer Feedback and Energy Demand – ASME Technical Session
Session Chair: Joyce McLaren, National Renewable Energy Laboratory
Papers to be presented include:
Evaluation of H.R. 2454's Potential Impacts on Texas's Electricity Profile Using the Rosenfeld Effect as a Basis for Evaluation
M. Lott and M. Webber, The University of Texas at Austin
An Updated Estimate for Energy Use In U.S. Food Production and Policy Implications
A. Cuellar and M. Webber, The University of Texas at Austin
Evaluating the Cost of Food in a Carbon Constrained Economy
K. Twomey and M. Webber, University of Texas at Austin

CSP System Studies – ASME Technical Session
Session Chair: Diego A. Arias, Abengoa Solar Inc. and Markus Eck, German Aerospace Center
Papers to be presented include:
Life Cycle Assessment of a Model Parabolic Trough Concentrating Solar Power Plant with Thermal Energy Storage
J. Burkhardt, G. Heath and C. Turchi, National Renewable Energy Laboratory
Modeling, Simulation and Assessment of Solar Thermal Power Plants _ A First Step Towards Definition of Best Practice Approaches
M. Eck, German Aerospace Center; T. Hirsch, R. Buck, J. Dersch, J. Feldhoff, S. Giuliano, K. Hennecke, E. Lⁿpfert and P. Schwarzbчzl, DLR
The Impact of Hybrid Wet/Dry Cooling on Concentrating Solar Power Plant Performance
M. Wagner and C. Kutscher, National Renewable Energy Laboratory
Correlations Between Geographically Dispersed Concentrating Solar Power and Demand in the United States
M. Mowers, C. Helm, N. Blair and W. Short, NREL
A Numerical Model for Off-Design Performance Calculation of Parabolic Trough Based Solar Power Plants
P. Silva, G. Manzolini, E. Macchi, A. Giostri and C. Saccilotto, Politecnico di Milano

Energy Storage and Thermal Insulation – ASME Technical Session
Session Chair: Joerg Petrasch, University of Florida
Papers to be presented include:
Minimizing On-Peak and Off-Peak Demands for a Thermal Storage System: Forecast Model Analysis to Predict Next Day Daily Average Load and Model Application
L. Song, University of Oklahoma and I. Joo, BENEFF, LLC
Thermal Storage Systems for District Heating Networks
V. Verda and F. Colella, Politecnico di Torino - DENER
A New Approach to Determine Optimum Insulation Thickness for all Buildings in Turkey according to Heating Loads and Heat Gains
D. Izkan and C. Onan, Yildiz Technical University
Green Energy Storage for Better Efficiency
J. Langaker, P.E., Burns and McDonnell Engineering

Hydrogen Production and Hydrogen Systems Analysis – ASME Technical Session
Session Chair: Ali Jalalzadeh-Azar, National Renewable Energy Laboratory
Papers to be presented include:
Numerical Optimization of a Volumetric Solar Receiver-Reactor for Thermochemical Hydrogen Generation via Decomposition of Sulfur Trioxide
A. Noglik, M. Roeb, R. Pitz-Paal, DLR and C. Sattler, German Aerospace Center DLR.
Modeling of Vortex-Flow Solar Reactor via Ideal Reactors in Series Approach
N. Ozalp, V. Shilapuram and J. Devanuri, Texas A&M University at Qatar
Alternatives to Electricity for Transmission and Annual-scale Firming Storage for Diverse Renewable Energy Resources: Hydrogen and Ammonia Fuels
W. Leighty, The Leighty Foundation
3D Modeling of Polymer Electrolyte Fuel Cell and Hydrogen Storage Tank
Y. Wang University of California Irvine
Material and Energy Process-step Models of Solar Hydrogen Production Techniques
B. Al Akkad, M Almodaris, E. Howard, J. Abraham, S. Khorasani, N. Ozalp Texas A&M Qatar

Low/Zero Energy Buildings (3) – ASME Technical Session
Session Chair:
Papers to be presented include:
Experimental Study for the Energy Efficiency of Hot-Wall Kang
Z. Wang, L. Duanmu, J. Zhu and Y. Zhao, Dalian University of Technology
Construction and Implementation of the Off-Grid Zero Emissions Building
J. Kramer and B. Greska, Florida State University
Systems Integration for Cost Effective Carbon Neutral Buildings: A Masdar Headquarters Case Study
J. Boyer, M. Araji, Adrian Smith + Gordon Gill Architecture; M. Jalayerian and A. Silverstein, Environmental Systems Design Inc.

Thermoeconomic Analysis – ASME Technical Session
Session Chair: Erol Ulucakl, Lafayette College
Papers to be presented include:
Exergy Analysis of an Integrated Gas Turbine Thermoacoustic Engine
K. Ghorbanian and M. Karimi, Sharif University of Technology
Analysis of Carbon Dioxide Emission Reductions from Energy Efficiency Upgrades in Consideration of Climate Change and Renewable Energy Policy Initiatives Using eQUEST
A. Sclafani, NORESCO
Probabilistic Energy ROI Models: Carbon, Energy, and Dollars
D. Hill, Det Norske Veritas (DNV) Research
Defining a Standard Measure for Whole System EROI Combining Economic Top-Down and LCA Bottom-Up Accounting
C. King, University of Texas at Austin; P. Henshaw, HDS Systems Design Science and J. Zarnikau, Frontier Associates. LLC
Thermoeconomic Study of a Small Integrated Parabolic
M. DURAN, E. Rincon, ENGINEERING FACULTY, UNIVERSIDAD AUTONOMA DEL EDO. DE MEX. And M. Sanchez, Faculty Engineering, Universidad Autonoma del Edo. de Mex.

Wind Turbine Design and Simulation – ASME Technical Session
Session Chair: Robi Robichaud, National Renewable Energy Laboratory
Papers to be presented include:
Preliminary Results of a Measurement Station to Characterize the Wind Energy Potential at the Eastern of Mexico
R. Soler-Bientz and L. Ricalde-Cab, Autonomous University of Yucatan
A Comparative Wind Investigation Using Mesoscale Numerical Predictions and Experimental Data at Aubrey Cliffs, Arizona
M. Barton, T. Acker and E. Duque, Northern Arizona University
Numerical Investigation of Wind Turbine Airfoil Separation Control
S. Kondaraju, A. Gross and H. Fasel, University of Arizona
Feasibility of Wind Power for Brackish Groundwater Desalination: A Case Study of the Energy-Water Nexus in Texas
A. Stillwell and M. Webber, University of Texas at Austin

Friday, May 21, 2010
12:15pm to 1:45pm

ASME PT-52: Solar Standards Meeting

Friday, May 21, 2010
1:30pm to 5:30pm

PLEASE NOTE - THIS WORKSHOP HAS BEEN CANCELLED
Hybrid Renewable Energy Systems – brought to you by ASME - WS20

Weatherization Analysis for Existing Homes – brought to you by ASME - WS19 - (separate registration required)
Friday, May 21
1:30pm to 5:30pm
Registration Price: $145 on or before April 1, $155 after April 1, $165 on-site
You DO NOT have to register for the conference to register for a workshop. On the Conference Fees page in the registration system, choose "Workshops, Tours, Special Events Only."
Presented by: Moncef Krarti, Professor, UCLA Department of Civil, Environmental, and Architectural Engineering, Building systems Program, University of Colorado.
Description: The energy efficiency and thermal comfort for existing homes can be improved through simple and proven retrofit measures. In this workshop you will learn how to quickly assess the energy efficiency of existing homes and how to screen homes suitable for weatherization retrofits. Moreover, you will learn about monitoring and verification procedures to measure the actual impact of weatherization programs on the energy performance of existing homes. You will also learn about simple analysis methods and testing procedures suitable for existing buildings.
Materials to be provided to attendees include a textbook on energy auditing written by Moncef Krarti.
Who should attend? Architects, Builders, Energy Consultants, Homeowners, Educators, Students
More Details >
4 AIA CEU's - Health & Welfare and Sustainability - available for this session

Friday, May 21, 2010
2:00pm to 3:30pm

Advances in Photovoltaics 1 – ASME Technical Session
Session Chair: Ortega Alfonso, University of Villanova
Papers to be presented include:
Photovoltaic Module Assembly as Appropriate Technology in Pakistan
F. Ahmad, University of Dayton; R. Komp, Skyheat Associates; I. Ahmad, Institution of Electrical and Electronics Engineers Pakistan, and K. Kissock, University of Dayton
Thermal Computational Model To Analyze PV Modules: Preliminary Results
R. Soler-Bientz, F. Gomez Castro and L. Ricalde-Cab, Autonomous University of Yucatan
Organic Solar Cell with Carbon Nanotubes Anode
L. Ren and S. wang, Texas tech University
Viability of Grid-Connected Rooftop PV for Residential Homes in Malaysia
A. Sher Mohamad, Uniten and J. Pasupuleti, Universiti Tenaga Nasional

Biodiesel – ASME Technical Session
Session Chair: Chao Tan, University of Calgary
Papers to be presented include:
Laser-Induced Incandescence and Smoke Point Measurements to Characterize the Sooting Propensity of Biodiesel Diffusion Flame
M. Tran, University of California, Irvine and T. Pham, California State University, Los Angeles
Experimental Investigation on Variation of FFA in Used Cooking Oil and Optimization of Conversion to Biodiesel
S. Ramanathan Chandrasekaran, Clarkson University; S. Avasarala, F. Jalal, SVCE, L. Miranda, AC Tech Anna university and S. Paneerselvam, Sri Venkateswara College of Engineering
Optimized Preparation of Moringa Oleifera Methyl Esters Using Sulfated Tin Oxide as Heterogenous Catalyst
G. Kafuku, M. Mbarawa, Tshwane University of Technology; M. Lam and K. Lee, Universiti Sains Malaysia
Analytical Tools for Evaluating Algal Biodiesel Production
C. Beal, M. Webber, R. Ruoff and D. Romanovicz, University of Texas at Austin

Novel CSP Systems – ASME Technical Session
Session Chair: Clifford Ho Sandia National Laboratory, David Sánchez University of Sevilla
Papers to be presented include:
Modeling On/Off-Design Performance of Solar Tower Plants
P. Silva, S. Campanari, F. Colzi, S. Petrucci, G. Manzolini, Politecnico di Milano; R. Chacartegui and D. SЯnchez, University of Sevilla
Implementation of an Integrated Solar Combined Cycle on an Existing Coal Fired Power Plant
E. Reitze and H. Price, Abengoa Solar Inc.
Installation and Operation of Southern Nevada Water Authority's Amonix High Concentration Multi-Junction System
A. Sahm, R. Hurt, R. Boehm, University of Nevada Las Vegas; K. Stone, Amonix Inc and G. Wood, Southern Nevada Water Authority
Enhanced Efficiency in a Coupled Photovoltaic/Thermal Concentrating Solar Collector
I. Chowdhury, J. Sherbeck, P. Phelan, Arizona State University; M. Burrell, T. Otanicar, Loyola Marymount University and R. Prasher, Intel Corporation
Solar Thermal Closed-Helium Brayton Cycle with High Temperature Phase-change Thermal Storage
X. Xu, M. Valmiki, S. Pradhan, H. Liu and P. Li, University of Arizona

Renewable Energy and Energy Policy in Urban Infrastrcture – ASME Technical Session
Session Chairs: Hongxi Yin, Purdue University and Ming Qu, Purdue University
Papers to be presented include:
Renewable Powered Desalination In Coastal Mekong Delta
H. Nguyen and J. Pearce, Queen's University
Design and Analysis of a Continuous Operating Solar Absorption Cooling System
S. Patil, K. Zhang, Cornell University; A. Sahasrabuddhe and S. Padhye, Mumbai University
Energizing Sustainable Communities
S. Naranjo Palacio, K. Zhang, M. Basu, D. Patel and J. Trager, Cornell University
Application of Regional Bio-Refining to Increase the Sustainability and Energy Self-Sufficiency of Rural and Agricultural Communities
D. Gallaspy and R. Sears, Common Place Energy, LLC

Solar Energy and Buildings – ASME Technical Session
Session Chair: J. Gonzalez, City College of New York, and A. Hajiah, Kuwait Institute for Scientific Research
Papers to be presented include:
Ecological Sustainability of Fiber-Optics Solar Energy in the State of Qatar
M. Mahfoud and M. Shaikh, College of the North Atlantic-Qatar
A Simplified Method to Estimate Energy Savings Associated With Structural Insulated Panels Applied to Single Family Homes
M. Krarti and M. McCullum, University of Colorado
A Simulation of the Thermal Performance of a Small Solar Chimney Already Installed in a Building
J. Arce, J. XamЯn, G. Alvarez, CENIDET; M. JimΘnez, CIEMAT-PSA; R. Enrφquez and M. Heras, CIEMAT-MONCLOA
Solar Assisted Household Clothes Dryer
J. Luttrell, Lockheed Martin Aeronautics

Wind Turbine Geometry and Materials – ASME Technical Session
Session Chair: Robi Robichaud, National Renewable Energy Laboratory
Papers to be presented include:
Multi-Axial Fatigue Life Assessment of Wind Turbine Structural Components/the Equivalency-Based Statistical Analysis of Linear or Linearized Stress-Life for Fatigue Data of Composite Materials
Z. Wei and T. Forte, Battelle Memorial Institute
Optimization of Flatback Airfoils for Wind Turbine Blades
X. Chen and R. Agarwal, Washington University in St. Louis
Adaptive Geometry Wind Turbine Blades for Increasing Performance
L. Albanese, F. Gandhi and S. Stewart, Penn State
Concepts Developed for a Multi-phased, Vertical Axis Wind Turbine (MVAWT) System with an Adjustable Inlet Air Scoop and Exit Drag Curtain
B. Krippene, BCK Consulting and I. Sorensen, California State University, Fresno
An Investigation of an Eppler 423 Style Wind Turbine Blade
D. McStravick, D. Garland, K. Davis and B. Houchens, Rice University

Friday, May 21, 2010
6:30pm to 8:30pm

ASME ES2011 Planning Committee